After the installation of auto parts, a series of adjustments need to be made to ensure the normal operation and safety of the vehicle. These adjustments include but are not limited to the following aspects:
1. Adjust the position of parts: After installing the parts, it is necessary to ensure that the parts are in the correct position and will not hinder the operation of other parts. For example, the position of engine parts needs to be installed correctly to ensure that the space between them and other parts such as gearboxes, radiators, etc. meets the standards and does not cause friction or collision.
2. Adjust the tightness of parts: The tightness of parts is very important. Too loose or too tight will affect the normal operation of parts and the safety of vehicles. Therefore, after installing the parts, it is necessary to check the fastening screws of the parts one by one to ensure that their tightness meets the requirements.
3. Adjust the connection method between parts: When installing parts, some parts need to be connected through connectors, and the adjustment of these connection methods is also very important. For example, the connection method of the drive shaft in the transmission system, the connection method of tires and wheels, etc., all need to be properly adjusted to ensure that they can operate normally.
4. Adjust the use of parts: Different parts require different ways of use during use, which also needs to be adjusted after installation. For example, the installed brake system needs to adjust the brake force of the system to ensure the sensitivity and stability of the brake system; the installed suspension system needs to adjust the suspension height to ensure the stability and comfort of the vehicle during driving.
5. Adjust the parameters of parts: After installing the parts, it is also necessary to adjust the parameters of some parts according to the actual situation and usage requirements of the vehicle. For example, the parameters such as the ignition timing of the engine and the preload of the spring need to be appropriately adjusted to ensure the performance and fuel economy of the vehicle.
In general, the adjustment required after the installation of automotive parts is a comprehensive process, which requires comprehensive consideration of the mutual influence between parts and vehicle performance requirements. Only after corresponding adjustments have been made in all aspects can the normal operation and driving safety of the vehicle be guaranteed.
Copyright By © Jiangsu Halreal Vehicle Industry Co., Ltd. Powered by Yicheng Network